Device Overview; General Description - ADEUNIS Sigfox MOTION V2 Guide Utilisateur

Sigfox MOTION V2 - Guide utilisateur / User guide version V2.0.1

1. DEVICE OVERVIEW

Description:
• The adeunis® Sigfox MOTION V2 device is a ready-to-use radio transmitter for detecting the presence of a heat source and so determine
the occupancy of a room, it also indicate the brightness level in a room.
• This product meets the needs of users to monitor the occupancy and brightness of their buildings via an LPWAN network.
• The device issues data periodically, alarms (presence and no presence) and when thresholds are high or low (luminosity).
FR
• The device includes 2 digital inputs: 1 through a button that send frames when pressed and an other to connect a dry contact sensor.
• The user can access the transmitter configuration locally via a micro-USB port or remotely via the Sigfox network. The user car configure, in
particular, periodicity, sending modes, alarms and activation or deactivation of the digital inputs.
• The Sigfox Smart Building MOTION is powered by a replaceable internal battery.
• The device is compatible with the adeunis® KARE Device Management platform
EN Package contents
The device is delivered in a carton package containing the following: Front panel, rear panel and electronic board, Removable LiSOCl2 FANSO
(battery-pack ER18505H+W36+51021), 2 x CBLZ 3.5x 19mm screws, 2 x SX5 Fischer plugs

1.1. General description

Opening the caser
Start button and connected but- 2 fixing screw locations
ton (function Digital Input 1)
Physical socket location for terminal block (Digital Input 2)
Page 32 of 46