ADEUNIS LoRaWAN Smart Building COMFORT Guide Utilisateur page 48

LoRaWAN Smart Building COMFORT - Guide utilisateur / User guide version V2.1.1
NOTE: It is possible to program the sending of a frame only after a certain number of edge detections (S381/S383).
Product in standby
FR
State
change
on digital
input(s)?
EN
Oui
Number of
occurrences
reached?
Send frame 0x51 or
0x52
Eg:
Register
S382
Non
S383
* Debounce time: minimum time to take account of a change of state. For example, if this period is
10 ms all pulses (high or low level) whose duration is less than 10 ms will not be considered. This
technique avoids potential rebounds during a change of state.
Non
In this example the device:
• The device has a debounce time of 100 ms and the button press alarm is enabled (register
383).
• The device sends a frame as soon as it has detected 5 high edges on its digital input per
terminal block (register S382)
The digital input operates only in event mode (no periodic sending).
Value code Value
Hexadecimal 0x41 Configuration of the Digital Input 2
input (terminal block):
• Detection of high edges
• Debounce time* 100ms
Decimal 5 The device sends a frame every 5
times that a high edge is detected on
Digital Input 2
Result
Page 48 of 51