Machine Maintenance; After Each Use; After Weekly Use - Nobles SPEED SCRUB 15 Manuel Opérateur

ENGLISH

MACHINE MAINTENANCE

To keep the machine in good working condition, simply
follow the machine's maintenance procedures.
FOR SAFETY: Before performing any maintenance
procedures turn the main power switch to the off
position.
FOR SAFETY: When servicing machine, all repairs
must be performed by a qualified service person.

AFTER EACH USE

1. Empty the recovery tank and thoroughly rinse with
clean water (Figure 25).
FIG. 25
2. Recharge the battery (See CHARGING BATTERY)
(Figure 26).
FIG. 26
3. Raise the scrub head to the transport position to
prevent flat spot on brush (Figure 27).
FIG. 27
12
Home Find... Go To..

AFTER WEEKLY USE

1. Clean the vacuum shut--off float with damp cloth
(Figure 28) and remove any debris buildup from
vacuum intake screen (Figure 29).
ATTENTION: Be careful not to get water in vacuum
intake screen, vacuum damage may result.
FIG. 28
2. Remove the brush and check for entangled debris
(Figure 30). Replace brush if damaged or worn.
FIG. 30
3. Tilt the machine back and clean the underside of
the scrub head (Figure 31).
FOR SAFETY: Before tilting machine, turn the main
power switch to the off position and empty tanks.
FIG. 31
Nobles Speed Scrub 15 Battery (03- -11)
FIG. 29