Machine Maintenance; Daily Maintenance; Weekly Maintenance; Monthly Maintenance - Nobles SpeedGleam Manuel Opérateur

Machine à polir à système de contrôle de la poussière de 36v
Masquer les pouces Voir aussi pour SpeedGleam:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION

MACHINE MAINTENANCE

To keep the machine in good working condition, simply
follow the daily, weekly, monthly and quarterly
maintenance procedures.
WARNING: Electrical Shock Hazard.
Disconnect Battery Cables Before Servicing
Machine.

DAILY MAINTENANCE

(After Every Use)
1. Remove the burnishing pad and clean or replace
(Figure 27).
FIG. 27
2. Empty or replace the dust control bag. Remove
the bag clip to empty bag (Figure 28). Do not allow
bag to fill beyond half full.
FIG. 28
3. Clean the machine with an all purpose cleaner and
damp cloth (Figure 29).
FOR SAFETY: When cleaning machine, do not
power spray or hose off machine. Electrical
malfunction may occur.
14
FIG. 29
4. Recharge the batteries after a total of 30 minutes
of use or more (See CHARGING BATTERIES).

WEEKLY MAINTENANCE

(Every 20 Hours of Use)
With an air pressure hose, blow out the dust that
collects inside the pad driver motor. This will
prolong the life of the motor. Safety Glasses
required (Figure 30).
FIG. 30

MONTHLY MAINTENANCE

(Every 80 Hours of Use)
1. Check the fluid level in each battery cell
(See BATTERY MAINTENANCE).
2. Clean the battery tops of corrosion
(See BATTERY MAINTENANCE).
3. Check for loose or corroded battery cables.
4. Lubricate the caster with a water resistant grease.
5. Check the machine for loose nuts and bolts.
6. Check the condition of the dust skirt, replace if
worn (Figure 31).
Nobles SpeedGleam/Plus (01- -05)

Publicité

Table des Matières
loading

Table des Matières