Cleaning With Accessory Tools (Option); Machine Maintenance; After Each Use - Nobles SPEED EX Manuel Opérateur

FIG. 18
10. When transporting machine, roll the machine on
both the main and rear tilt wheels.
FOR SAFETY: When transporting machine, do not
wheel up or down stairs.

CLEANING WITH ACCESSORY TOOLS (Option)

1. Connect the accessory tool hoses to solution hose
coupler and vacuum hose port located at the front
of the machine (Figure 19).
FIG. 19
2. Fill the solution tank (See FILLING SOLUTION
TANK on page 6).
3. Press the main power switch to the on ( I ) position
(Figure 20). Press the cleaning mode switch
towards the accessory tool mode (Figure 21).
FIG. 20
Nobles Speed Ex (03−08)
FIG. 21
4. Operate the accessory tool (Figure 22).
WARNING: Fire or Explosion Hazard, Do Not
Use or Pick Up Flammable Materials.
FIG. 22

MACHINE MAINTENANCE

To keep the machine in good working condition, simply
follow the machine's maintenance procedures.
FOR SAFETY: Before performing maintenance
procedures turn off machine and unplug power
cord from wall outlet.
ATTENTION: Contact an Authorized Service Center
for machine repairs.

AFTER EACH USE

1. Wipe clean the power cord and inspect it for
damage (Figure 23). Wrap power cord around
handle and cord hook when not in use (Figure 24).
FIG. 23
WARNING: Electrical Hazard, Do Not Operate
With Damaged Power Cord.
If the power cord is damaged or broken, it must be
replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a
hazard.
OPERATION
EN
FIG. 24
9