Grizzly AS 4026 Lion Notice D'utilisation Originale page 64

GB
E.g. do not use small tools or acces-
sories for work that should actually be
performed with heavy tools. Use tools
only for the purposes for which they
have been constructed.
5. Ensure appropriate clothing. Clothing
must be appropriate and not impede
you when working. Wear clothing with
cut protection pads.
6. Use personal protective equipment.
Wear safety boots with steel caps /
steel soles and non-slip soles.
Wear a hard hat if there is a risk of
falling objects when working.
7. Wear safety goggles. Objects may be
thrown out. Serious eye injuries may
result.
8. Wear ear protection. Wear personal
sound protection, e.g. earplugs.
9. Hand protection. Wear strong gloves
– leather gloves offer good protection.
10. Operating the equipment. Never work
without the protection on the cutting
tool. Risk of injury from objects being
thrown out.
11. Remove the socket wrench etc. All
keys or similar must be removed be-
fore the equipment is switched on.
12. Stay alert at all times. Pay attention
to what you are doing. Use your com-
mon sense. Do not use motorised
tools when you are tired. Work with
the equipment must not be carried out
under the influence of alcohol, drugs
or medications, which impair reac-
tions.
13. Usage duration and breaks. Pro-
longed use of the motorised equip-
ment can cause circulation disorders
in the hands as a result of the vibra-
tion. However, the usage duration can
be extended with suitable gloves or
regular breaks. Be aware that per-
sonal tendency to poor circulation,
low external temperatures and high
64
IB_AS_4026_Lion_B-39531_0216_TS.indb 64
gripping forces will reduce the usage
duration when working.
14. Be aware of damaged parts. Before
initial operation and after severe im-
pacts, check the equipment for signs
of damage and wear. Are individual
parts damaged? In case of slight dam-
age ask seriously whether the tool will
nonetheless work properly and safely.
Ensure correct alignment and adjust-
ment of moving parts. Do the parts in-
terlock correctly? Are parts damaged?
Is everything correctly installed? Are
all the other requirements in place for
proper functioning? Damaged safety
devices etc must be repaired or re-
placed by authorised people if there is
no explanation otherwise in the oper-
ating instructions. Defective switches
must be replaced by an authorised
body. If repairs are required, please
contact a customer service centre au-
thorised by us.
15. Always switch off the engine before
undertaking adjustments or mainte-
nance work. This particularly applies
for work on the cutting head.
16. Use only authorised parts. In case
of maintenance and repair, use only
identical spare parts. Contact the
Grizzly service centre for spare parts.
Warning! The use of other mowing
heads as well as accessories and
attachments that are not explicitly
recommended can result in danger to
people and objects.
The tool is to be used only for the in-
tended purpose. Any misappropriation
is regarded as improper use. The user
alone – and definitely not the manu-
facturer – is responsible for property
and personal damage resulting from
such improper use.
The manufacturer cannot be held li-
24.02.16 08:12