Symbols; Safety Information - Amprobe ACD-50NAV Mode D'emploi

1.800.544.2843

SYMBOLS

Caution ! Risk of electric
X
shock
Application around and
,
removal from hazardous live
conductors is permitted.
B
Alternating Current (AC).
Temperature Measurement
E
Capacitance Measurement
R
Continuity Beeper
To alert you to the presence
of a potentially hazardous
voltage, when the Meter
Y
detects a voltage ≧30 V or a
voltage overload (OL) in V.
This symbol is displayed.
Conform to relevant
�
Australian standards
Do not dispose of this product as unsorted municipal waste.
=
Contact a qualified recycler

Safety Information

• Individual protective equipment should be used if HAZARDOUS LIVE
parts in the installation where measurement is to be carried out
could be ACCESSIBLE
• This manual contains information and warnings that must be
followed for operating the instrument safely and maintaining the
instrument in a safe operating condition. If the instrument is used in
a manner not specified by the manufacturer, the protection provided
by the instrument may be impaired.
• The meter is intended only for indoor use.
• The meter protection rating, against the users, is double insulation
per IEC/EN 61010-1 3rd Ed, Category III 1000 Volts AC & DC and
Category IV 600 Volts AC & DC.
• Disconnect the test leads from the test points before changing the
position of the function rotary switch.
• Never connect a source of voltage with the function rotary switch in
e , E , , μA, position.
• Do not expose Meter to extremes in temperature or high humidity.
• Never set the meter in e , E , , μA, function to measure the voltage
of a power supply circuit in equipment that could result in damage
the meter and the equipment under test.
www.calcert.com
15
10 20
5 25
0 30
Caution ! Refer to the
�
explanation in this Manual
Equipment protected
T
by double or reinforced
insulation
F
Direct Current (DC).
e
Resistance Measurement
G
Diode Measurement
J
Earth (Ground)
Complies with European
�
Directives
Battery
1
sales@calcert.com