Symbols; Safety Information - Amprobe ACD-45PQ Mode D'emploi

SYMBOLS

�
Caution! Risk of electric shock
�
Caution! Refer to the explanation in this Manual
�
Double Insulation or Reinforced insulation
�
Alternating Current (AC).
�
Direct Current (DC).
 Fuse
�
Earth (Ground)
Please remove all the test leads before preforming maintenance,
�
cleaning, battery replacement, fuse replacement, etc
�
Complies with European Directives
�
Conforms to relevant Australian standards
Do not dispose of this product as unsorted municipal waste.
=
Contact a qualified recycler for disposal

Safety Information

This manual contains information and warnings that must be followed for
operating the instrument safely and maintaining the instrument in a safe
operating condition. If the instrument is used in a manner not specified by the
manufacturer, the protection provided by the instrument may be impaired.
The meter is intended only for indoor use.
The meter protection rating, against the users, is double insulation per IEC/
EN/UL 61010-1 Ed. 3.0, CAN/CSA C22.2 No.61010-1-12 Ed. 3.0 to Measurement
Category III 600 V, IEC/EN 61010-2-032 Ed. 3.0, IEC/EN 61010-2-033 Ed. 1.0
Per IEC61010-1 Measurement Category
Measurement Category IV (CAT IV) is for measurements performed at the source
of the low-voltage installation. Examples are electricity meters and measurements
on primary overcurrent protection devices and ripple control units.
1