Auto/Manual Range; Hold Key - Amprobe ACD-50NAV Mode D'emploi

1.800.544.2843
Other Function :

AUTO/MANUAL Range

Select the "RANGE" indicator, then press the navigator key to enter the
manual range mode. To return to the auto range mode, press the navigator
key for more than 2 seconds.
"Range"
"ENTER"
"Range"
>2SEC

HOLD Key

Press HOLD key to freeze display value.
Press
Hold key
SMART HOLD: The meter will beep continuously and the display will flash if
the measured signal is larger than the display reading. (for V.A.W function)
www.calcert.com
15
10 20
5 25
0 30
"Range"
19
sales@calcert.com