Know Your Product; Operation; Prior To Initial Operation - SPARKY Professional P 282 Instructions D'utilisation

source with a voltage less than the nameplate
rating is harmful to the motor.
purpose. Any use other than those mentioned
in this Manual will be considered a case of mis-
use. The user and not the manufacturer shall
be liable for any damage or injury resulting from
such cases of misuse.
safety regulations, the assembly instructions
and the operating instructions to be found in this
Manual. All persons who use and service the
machine have to be acquainted with this Manu-
r ards. Children and frail people must not use this
r tool. Children should be supervised at all times
if they are in the area in which the tool is being
used. It is also imperative that you observe the
accident prevention regulations in force in your
area. The same applies for general rules of oc-
cupational health and safety.
changes made to the tool nor for any damage
resulting from such changes.
possible to eliminate all residual risk factors. The
tion is not worn.
before making any adjustments or mainte-
nance, including changing the blades and ad-
justing the depth of cut.
ning and making contact with the blade.
doors in rainy weather, or in moist environment
mable liquids and gases. The working place
should be well lit.
V - Know your product
with all the operating features and safety require-
ments. Use the tool and accessories only for the
applications intended. All other applications are
expressly ruled out.
Instruction Manual
pages-P282.indd 5
1. On/Off trigger switch
2. Lock-off button
3. Depth adjustment knob
4. Main handle
5. Secondary handle
8. Dust / chip extraction guide switch
11. Clamping screw
12. Moveable front base
14. Parallel fence guide
- 15. Shavings adaptor tube
18. Spanner storage sleeve
VI - Operation
This model SPARKY power tool is supplied from
single-phase alternating current mains.It is double
can be connected to grounded or not grounded
sockets. This power tool is radio suppressed
-
ence.

PRIOR TO INITIAL OPERATION

to the value indicated on the name plate with
technical data of the tool.
-
If the replacement of the supply cord is neces-
sary, this has to be done by the manufacturer or
REMOVING AND INSTALLING
-
PLANER BLADES
-
CAUTION: Always ensure that the tool
is switched off and unplugged from the power
supply before installing or removing blades.
sides of the blades have been used they should
be discarded.
NOTE. These blades cannot be re-sharpened.
-
5
EN