Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
II - Technical
Model:
III - Safety instructions
WARNING: To reduce the risk of injury,
user must read instruction manual. Read all in-
below may result in electric shock, fire and/or
serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-op-
Observe these instructions!
WORK AREA
dark areas invite accidents.
ble liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
ating a power tool. Distractions can cause you
to lose control.
ELECTRICAL SAFETY
modify the plug in any way. Do not use any
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
tions. Water entering a power tool will increase
Instruction Manual
the risk of electric shock.
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
P 282
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
-1
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
PERSONAL SAFETY
common sense when operating a power tool.
2
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medi-
cation. A moment of inattention while operating
power tools may result in serious personal in-
jury.
tion. Safety equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protec-
tion used for appropriate conditions will reduce
personal injuries.
in the off-position before plugging in. Carrying
power tools with your finger on the switch or
plugging in power tools that have the switch on
invites accidents.
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
ance at all times. This enables better control of
the power tool in unexpected situations.
-
-
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
-
dust extraction and collection facilities, ensure
these are connected and properly used. Use
ards.
POWER TOOL USE AND CARE
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
-
must be repaired.
-
-
-
3
EN
Publicité
Chapitres
Table des Matières
