Getting To Know Your Appliance; The Control Panel; The Hotplates; Hotplate And Residual Heat Indicators - NEFF T1 K20 Série Mode D'emploi

Getting to know your appliance

The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2.

The control panel

+RWSODWH FRQWURO
VHWWLQJ DGMXVWPHQW

The hotplates

Hotplate
Single-circuit hotplate
$
Dual-circuit hotplate
ð
Halogen hotplate
<
Halogen hotplate with
<
power setting
When the hotplate is activated, the corresponding indicator lights up.

Hotplate and residual heat indicators

The hotplate and residual heat indicators
hotplate is warm:
Hotplate indicator - during operation, shortly after you have
■
switched on a hotplate.

Setting the hob

This section informs you how to set the hotplates. The table
shows heat settings and cooking times for various meals.

Switching the hob on and off

You can switch the hob on and off with the hotplate controls.

Setting a hotplate

Adjust the heat setting of the hotplates using the hotplate
controls.
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
The symbol in the display panel indicates the hotplate to which
the display relates, e.g.
¢
Note: Hotplate temperature is regulated by the heat switching
on and off. The heat may also switch on and off at the highest
setting.
14
IRU KHDW



 
  
  

Activating and deactivating
To activate: turn the hotplate control clockwise to
hotplate control to 0 and reset. Never turn the hotplate control beyond the
Note: do not look into the halogen light as the glare may dazzle the eyes.
To activate: turn the hotplate control to the
place. To switch off: turn the hotplate control from the power setting to the desired heat setting.
light up when a
"
for the right rear hotplate.
$FWLYDWLRQ
Æ SRZHU VHWWLQJ IRU WKH
KDORJHQ KRWSODWH
 



 
  
 
˜
Residual heat indicator - after cooking, when the hotplate is
■
still warm.
You can use the residual heat to save energy, e.g. to keep a
small dish warm or to melt chocolate.
$FWLYDWLRQ
Í GXDOFLUFXLW
KRWSODWH

 
 

  
 

ð . Set the heat setting. To switch off: turn the
Power setting. The hotplate control clicks into
ð symbol to 0.