Using Mute; Activating Mute; Deactivating Mute - Harman AKG DMM14 U Mode D'emploi

operAting the Device
MUTE
DMM14 MANUAL
Step Description
2 Press the rotary knob for the corresponding input or output for
between 8 and 10 seconds.
•
3 Release the rotary knob after the beep
•
8.8

Using MUTE

8.8.1

Activating MUTE

Inputs and outputs can be switched to MUTE. Proceed as follows:
Step Description
In the LEVEL function, briefly press the rotary knob for the
1
corresponding input or output.
•
•
•
The MUTE function cannot be used for the HEADPHONE rotary knob!
8.8.2

Deactivating MUTE

To deactivate the MUTE function proceed as follows:
Step Description
1 Briefly press the rotary knob for the corresponding input or
output.
•
•
An acoustic signal (beep) is sounded.
The device preset is deleted and cannot be selected (emp-
ty storage location, LED 1 lit)
The corresponding channel is muted.
All LEDs previously lit will flash.
The current volume is stored.
MUTE function for the corresponding channel is deactivat-
ed.
The volume previously stored is applied.
120