7.4.11 Routing To Rec - Harman AKG DMM14 U Mode D'emploi

fUnctionAL Description
ROUTING TO
REC
DMM14 MANUAL

7.4.11 ROUTING TO REC

AUTOMIXING
COMPRESSOR
LIMITER
LOW CUT
BASS
TREBLE
LEVEL
LOCKED
SYSTEM CONTROL
Figure 43: ROUTING TO REC function
All the input channels can be controlled in the ROUTING TO REC mode.
off
8
ON PEAK
Figure 44: Adjustment range for the ROUTING TO REC function
The function for the relevant channel is switched on by turning the rotary
knob in the clockwise direction (entire LED ring is illuminated). Turning the
rotary knob counter-clockwise switches the function off (only one LED is
illuminated).
Pressing the rotary knob also switches the function on or off.
Switching this on sets the input channel to the OUT 1 master bus.
PRIORITY
PAN / BALANCE
DELAY
ROUTE TO REC
ROUTE TO USB
EQUALIZER
PRESET
IN USB / DANTE
on
8
ON PEAK
ROUTING TO REC
109