Listening To The Audio Signal - Harman AKG DMS800 Mode D'emploi

oPerAting instructions
Listening to the
audio signal
DMS800 MANUAL
Step Description
Select the UTILITY menu; to do this, press the SELECT wheel
2
and turn to the right
Select the COUNTRY menu; to do this, press the SELECT
3
wheel and turn to the right
Press the SELECT wheel
4
Select the country-specific frequency set.
If your country is not listed, select the SD (standard) setting.
8.6

Listening to the audio signal

To listen to the audio signal, proceed as follows:
Step Description
Plug headphones with 6.3 mm stereo jack plug into the head‑
1
phones output (7)
Activate the audio signal; to do this, tap the Headphones CH1
2
or CH2 (6) button
Deactivate the audio signal; to do this, press the
3
Headphones CH1 or CH2 (6) button for at least one second
87