Harman AKG DMS800 Mode D'emploi page 83

QuicK setuP
DMS800 MANUAL
Step Description
Keep the transmitter's infrared sensor at a distance of approx.
10
10 cm of the receiver's infrared sensor
The receiver display shows a message confirming the suc‑
cessful synchronisation.
Return to the channel list by pressing the BACK wheel once
11
Select channel 2 by turning the SELECT wheel to the right
12
On the display, the question is shown as to whether or not to
assign the channel.
Assign channel 2 by pressing CH2
13
Repeat steps 7 to 10
14
83