Functional Description; Channel Menu - Harman AKG DMS800 Mode D'emploi

functionAl descriPtion

DMS800 MANUAL
14 Functional description
The DSR800 has been developed for operation in large multi-channel sys-
tems.
14.1

CHANNEL menu

This menu can be used to manually set all parameters relevant for a chan-
nel such as group/channel, frequency, name, input level of the bodypack
transmitter, encryption and MUTE LOCK.
The DSR800 receiver provides frequency groups with specially calculated
frequencies. The required channel (frequency) can be manually set and
synchronised in this menu.
Ensure that all channels are selected from the same group within the same
presets. To search for free channels, we recommend the QUICK SETUP
function
The following table describes the functions of the submenus in the
CHANNEL menu.
Submenu
FREQUENCY
NAME
MIC GAIN
TRANSM.
POWER
Function
Set the frequency directly in 25 kHz increments
Assign any name for each channel (name of a musi‑
cian, instrument, or similar)
Adjust the audio input level of the transmitter to the
connected microphone
Set the transmission power of the synchronised trans‑
mitter
105