Equipment Description; General Description; Functions Of The External Mute; Technical Data - Harman AKG DMS800 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

eQuiPment descriPtion

Description
MUTE switch
DMS800 MANUAL
5
Equipment description
5.1

General description

The DMS800 consists of the following parts:
DSR800 digital stationary true diversity transmitter
DHT800 handheld transmitter and/or DPT800 bodypack transmitter
There is the choice of AKG microphone heads with the handheld transmitter:
D5 WL1
D7 WL1
C5 WL1
Both the receiver and the transmitter operate in a switching bandwidth of up
to 150 MHz. The country-specific frequency bands work within a UHF brand
from 548 to 832 MHz.
This means you can select the receiver frequency from the preprogrammed
frequency groups and channels (presets) of your receiver or set them di-
rectly in 25-Hz increments.
Both the handheld and the bodypack transmitters are programmed to the
parameters set on the receiver via infrared transmission.
5.2
Functions of the external MUTE switch (optional)
The optional, external MUTE switch RMS4000 allows the bodypack trans-
mitter to be switched to mute even if the transmitter is fitted in a way that
makes the integrated MUTE switch hard to access
5.3

Technical data

System data
Carrier frequency range
Switching bandwidth
Audio bandwidth
THD
Band 1: 548.1 – 697.9 MHz (country‑depend‑
ent)
Band 2: 710.1 – 831.9 MHz (country‑depend‑
ent)
≤ 150 MHz (country-dependent)
25 Hz – 20 kHz (± 3 dB)
≤ 0.02 %
69

Publicité

Table des Matières
loading

Table des Matières