Switch On Mute Lock; Programming The Transmitter To The Receiver Settings - Harman AKG DMS800 Mode D'emploi

oPerAting instructions
MUTE LOCK
Programming the
transmitter to the
receiver
DMS800 MANUAL
To unlock the receiver, proceed as follows:
Step Description
Press SELECT wheel (5) for approx. 2 seconds
1
The "LOCK" symbol disappears from the display.
The receiver is in SETUP mode.
8.2

Switch on MUTE LOCK

To avoid the MUTE switch on the transmitter being switched on acciden-
tally, it can be locked via the receiver.
To lock the MUTE switch, proceed as follows:
Step Description
Switch on the receiver
1
Select the CHANNEL menu; to do this, turn the SELECT wheel
2
to the right
Press SELECT
3
Select the MUTE LOCK menu; to do this, turn the SELECT
4
wheel to the right
Press SELECT
5
The MUTE LOCK menu is opened.
MUTE LOCK is on OFF.
Press SELECT
6
MUTE LOCK is on ON and is activated.
8.3

Programming the transmitter to the receiver settings

During synchronisation, the receiver monitors all previously selected trans-
mitter settings (group/channel, frequency, name, input level of the bodypack
transmitter, transmitter output, encryption and MUTE LOCK).
85