Horizon Fitness T101 Manuel Du Propriétaire page 13

ASSEMBLY STEP 4
HARDWARE FOR STEP 4 :
BOLT (E) SPRING WASHER (C)
15 mm 15 mm
Qty: 4 Qty: 4
CONSOLE
ASSEMBLE
LEFT SIDE
FIRST
FLAT WASHER (D)
15 mm
Qty: 4
WATER BOTTLE POCKETS
CONSOLE CABLES
FLAT WASHERS (D)
SPRING WASHERS (C)
BOLTS (E)
CONSOLE MAST
A Disengage the DECK LOCK LATCH with your foot to
lower the RUNNING DECK.
B Open HARDWARE FOR STEP 4.
C Gently place the CONSOLE on top of the CONSOLE
MASTS. Attach the LEFT SIDE first using 2
BOLTS (E), 2 SPRING WASHERS (C) and 2 FLAT
WASHERS (D).
D Detach and discard the LEAD WIRE. Connect the
CONSOLE CABLES and carefully tuck wires in
masts to avoid damage.
E Attach the RIGHT SIDE of the CONSOLE using 2
BOLTS (E), 2 SPRING WASHERS (C) and 2 FLAT
WASHERS (D).
NOTE: Be careful not to pinch any wires
while assembling the console.
F Insert WATER BOTTLE POCKETS into CONSOLE.
G Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE
section in the TREADMILL GUIDE.
YOU ARE FINISHED!
13