Horizon Fitness T101 Manuel Du Propriétaire page 12

ASSEMBLY STEP 3
BOLT (B)
20 mm
Qty: 4
12
HARDWARE FOR STEP 3 :
SPRING WASHER (C)
15 mm
Qty: 4
RUNNING
DECK
CONSOLE CABLE
BASE FRAME
Open HARDWARE FOR STEP 3.
A
Attach LEAD WIRE to bottom end of
B
FLAT WASHER (D)
CONSOLE CABLE. Pull LEAD WIRE through
15 mm
Qty: 4
RIGHT CONSOLE MAST. After pulling the
lead wire through the mast, the top of the
CONSOLE CABLE should be located at the
top of the mast.
LEAD WIRE
With the RUNNING DECK in the raised
C
position, attach the RIGHT CONSOLE
MAST to the BASE FRAME using 4 BOLTS
(B), 4 SPRING WASHERS (C) and 4 FLAT
WASHERS (D).
RIGHT CONSOLE MAST
BOLTS (B)
SPRING WASHERS (C)
FLAT WASHERS (D)
NOTE: Be careful not to pinch any wires
while assembling the right console mast.