Inserting And Removing Connecting Cable Plug; Inserting The Connecting Cable Plug - Stihl 4869 Notice D'emploi

7 Inserting and Removing Connecting Cable Plug

3
1
► Feed strap (1) back through the ring (2) and the belt (3).
► Close the Velcro® fastening on the strap (1).
► Push battery (4) as far as it will go into the belt bag (5).
A short beep will sound.
► Secure battery (4) with the Velcro® fastening (6).
6.3.2 Adjusting the Connecting Cable
The connecting cable can be fitted and adjusted to suit the
user's size and the application.
0458-005-9621-A
1
4
5
3
The length of the connecting cable can be adjusted by
making a loop (1) and securing it to the belt bag (3) with the
fastener (2).
► Arrange the connecting cable so that it is as short as
possible without hindering your work.
7 Inserting and Removing Connecting
Cable Plug
6
7.1

Inserting the Connecting Cable Plug

► Hold connecting cable plug (1) so that the arrow on its side
lines up with the arrow on the socket (2).
► Insert the connecting cable plug (1) in the socket (2).
The plug (1) engages in position.
2
1
2
1
English
41