Dolmar TM-92.14 Manuel D'utilisation page 108

Masquer les pouces Voir aussi pour TM-92.14:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

26
EN
To ...
Cut the grass (☛ 5.4.5)
Empty the grass-catcher (☛ 5.4.6)
Unblock the collector channel (☛ 5.4.7)
Finish mowing (☛ 5.4.8)
Stop the engine (☛ 5.4.9)
Store the machine (☛ 5.4.10)
5.5 USING THE MACHINE ON SLOPING GROUND
Only mow on slopes with gradients up to the
maximum already mentioned (max 10° -
17%).
Lawns on a slope have to be mowed moving
up and down and never across them. When
changing direction, take great care that the
wheels facing up the slope do not hit any
obstacles (such as stones, branches, roots,
etc.) that may cause the machine to slide
sideways, tip over or make you lose control.
DANGER!
!
SLOPES, and always apply the parking brake before leaving the machine at a
standstill and unattended.
WARNING!
!
prevent the risk of tipping over. Reduce the forward speed before going on a
slope, particularly downhill.
You will need to ...
Fit the grass-catcher or stone-guard and apply the throttle;
engage the blades and adjust the cutting height.
Mechanical transmission: push the pedal right down,
shift into forward gear ( ☛ 4.22) and then gradually
release the pedal;
Hydrostatic transmission: press the drive pedal for-
wards ( ☛ 4.32);
Stop moving forwards, disengage the blades and pull out
the lever to tip up the grass-catcher.
Stop moving forwards, disengage the blades and turn off
the engine. Remove the grass-catcher and clean the col-
lector channel.
Disengage the blades and reduce the engine speed.
Reduce the engine speed, wait a few seconds, turn the key
and close the fuel stopcock.
Engage the parking brake, remove the key and, if neces-
sary, wash the machine, the inside of the cutting deck, the
collector channel and the grass-catcher.
REDUCE SPEED BEFORE ANY CHANGE OF DIRECTION ON
Start moving forwards very carefully on sloping ground to
HOW TO USE THE MACHINE
max 10° (17%)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tm-92.14 h

Table des Matières