Technical Specifications - IKRA ALB 40 Mode D'emploi

Cordless Blower ALB 40

Technical Specifications

Battery voltage/operation voltage
Battery type
(not included in the scope of delivery)
Battery charger
(not included in the scope of delivery)
Operating time
Blowing speed
Suction power (max. air flow)
Weight
Sound Pressure Level L
Measured acoustic capacity level
Guaranteed acoustic capacity level L
Vibration
(EN 50636-2-100:2014)
Technical changes are reserved.
WARNING: When in operation, the tool's actual vibration emissions value can deviate from the specified value de-
pending on how the tool is used, as in the following examples or because it is used in another way:
- How the tool is being used and which materials are being cut.
- The tool is well maintained and in good working order. The correct accessories are being used and care has been
taken to make sure they are sharp and in good working order.
- How secure the hand grip is and whether anti-vibration accessories are being used.
- Whether the tool is being used in accordance with its design and as specified in these instructions.
- The tool can cause hand-arm vibration syndrome symptoms if it is not used properly.
WARNING: To make sure, an assessment should be made of the strain exerted when the tool is in use, for example
when the tool is switched off or is idling. This will make it possible to significantly reduce the strain exerted during
the entire time the tool is in use.
Minimise your risks if the tool vibrates.
Take care of the tool as specified in these instructions and make sure the tool is properly lubricated (if necessary).
If you use this tool regularly, you should invest in anti-vibration accessories.
If the temperature is 10°C or less, do not use the tools. Prepare a work schedule so that work is distributed over
several days when using tools that exert high vibrations.
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Direc-
tive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
pA (EN 50636-2-100:2014)
L
WA (2000/14/EG)
WA (2000/14/EG)
40 V DC
Li-Ion 40 V / 2,5 Ah / 100 Wh
R3-360-AH-U-01 / R3-360-AH-U-02
R3-360-3A-02 quick charger
R3-360-1A-02 normal charger
max. 10 - 60 min
320 km/h
13 m³/min
2,7 kg
85 dB(A)
K = 3,0 dB
95 dB(A)
K = 3,0 dB
96 dB(A)
2 K = 1,5 m/s
<2,5 m/s
GB-11
2