Trebs Comfortcook 99344 Mode D'emploi page 18

Remark: During use, the indicator sometimes switches on and off to indicate
that the device is being kept at the optimal temperature.
If kernels are sticking to the hot plate, please use the handle to lightly shake
the device. This prevents the popcorn from burning. If you add an
insufficient amount of oil, the kernels may burn and might not pop.
Warning: It's possible that some of the kernels expand and explode while
the device is operating. Always be careful and never touch the popcorn
immediately as it may be too hot.
4. Using the device for making crepes
Check whether the device is clean and dry, make sure that it's switched off
and the plug is removed from the wall socket.
STEP 1: Place the device onto a flat, stable surface at a height comfortable
for the user.
STEP 2: Insert the plug of the device into a wall socket.
STEP 3: Switch on the device using the power switch. The indicator will
switch on.
STEP 4: Let the device preheat for approx. 1.5 to 2 minutes. The indicator
switches off as soon as the required temperature is reached.
STEP 5: Measure one levelled off unit of batter using the measuring cup and
pour the batter onto the hot plate. Never use more than one levelled off unit
of batter at once, otherwise the result may be disappointing.
STEP 6: Use the batter spreader to spread out the batter: make circular
movements until the battery is spread out evenly over the hot plate.
STEP 7: Cook the crepe for approx. 2 minutes or until the bottom turns
brown.
STEP 8: When the crepe starts bubbling, loosen the edges with a spatula,
turn over the crepe and continue cooking until done.
STEP 9: When the crepe is ready, turn off the device with the power switch
and remove the plug from the wall socket.
STEP 10: Carefully slide the crepe off the device.
16