Technical Data; Installation - ESAB Origo Mig 410 Manuel D'instructions

US
4

TECHNICAL DATA

Voltage
Permissible load
at 100 % duty cycle
at 60 % duty cycle
at 50 % duty cycle
Setting range (DC)
Open circuit voltage
Open circuit power
Efficiency at max current
Power factor at max current
Control voltage
Dimensions LxWxH
Weight
Operating temperature
Transportation temperature
Enclosure class
Application classification
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld at a cer­
tain load without overloading. The duty cycle is valid for 104° F.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP 23 is designed for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
5

INSTALLATION

The installation must be done by a professional.
Note!
Connect the power source to the electricity mains with a network impedance of 0.230W (Mig 410w),
0.155W (Mig 510w) or lower. If the network impedance is higher, there is a risk of flicker in the
illuminators.
This product is intended for industrial use. In a domestic environment this product
may cause radio interference. It is the user's responsibility to take adequate
precautions.
ba58ae
Mig 410
230/400-415/500V 350 Hz
230/440-460 360Hz
280 A/28 V
365 A/32 V
400 A/34 V
50A/16.5V-400A/34V
17-45 V
360 W
71%
0.98
42 V, 50/60 Hz
32 x 21.8 x 36.5"
(812 x 552 x 925 mm)
319.6 lbs (145 kg)
- 50 to + 104°F
(-10 to +40°C)
-68 to -131°F
(-20 to +55°C)
IP 23
- 9 -
Mig 510
230/400-415/500V 350 Hz
230/440-460 360Hz
390 A/33,5 V
500 A/39 V
-
50A/16.5V-400A/39V
17-50 V
440 W
82%
0.92
42 V, 50/60 Hz
32 x 21.8 x 36.5"
(812 x 552 x 925 mm)
474 lbs (215kg)
- 50 to + 104°F
(-10 a +40°C)
-68 to -131°F
(-20 a +55°C)
IP 23
© ESAB AB 2011