VMB TL-054 Mode D'emploi page 12

Quick Operation Guide
3. SAFETY PRECAUTIONS.
VMB ESPAÑOLA, S.A.
3.1 - The TL-054 / TL-055 / TL-056 is a
machine designed to elevate loads upwards
in a vertical direction, NEVER should it be
used as a platform to elevate people.
3.2 - Only place the lift on hard, flat surfaces
always checking that it is in a vertical position
by using the bubble level indicator (F) found
on the base section. Adjust the outrigger
stabilisers (Q) by turning the cranks to level
if necessary. NEVER use wedges or other
foreign objects to bring the lift to equilibrium.
3.3 - Check that the outriggers are placed
and set-up correctly using the pins safety
system.
3.4 - NEVER should the lift be used to
elevate a load that has not been properly
checked. It is necessary to verify that the
load is correctly supported and centred on
the appropriate lift support so that the weight
of the load will only elevate in a vertical
direction.
3.5 - The maximum load indicated on the
characteristics label and the instructions
manual should not be exceeded
Kgs
ENGLISH
!
v7.03 - Depósito legal y Copyright 2007. Todos los derechos reservados.