Dear Customer,
Thank you for purchasing the CI Touch®
fully automatic coffee maker.
The operating instructions will help you
discover the diverse options offered by the
appliance and enjoy your coffee to the full.
Read through the operating instructions
carefully. This helps avoid personal injury
and material damage. Store the operating
instructions carefully. If you pass on the
appliance, include the operating instruc-
tions with it.
Melitta accepts no liability for damage
caused by failure to observe the operating
instructions.
If you require further information or have
any questions on the appliance, contact
Melitta or visit our website at:
www.international.melitta.de/
We hope you enjoy using your appliance.
2
For your safety
The appliance conforms to the
relevant European directives and
has been manufactured using the latest
technology. Nevertheless, some residual
dangers remain.
Observe the safety instructions to avoid
dangers. Melitta accepts no liability for
damage caused by failure to observe the
safety instructions.
2.1 Proper use
The appliance is used to prepare
coffee beverages made from cof-
fee beans or ground coffee, and
to heat milk and water.
The appliance is intended for use
in private households.
Any other use is regarded as
improper and may lead to per-
sonal injury and material dam-
age.
Mel_009_CI_Touch_20_de--kr_druck.indb 33
2.2 Danger from electric
current
If the appliance or the power
cable is damaged, there is a risk
of fatal electric shock.
To avoid danger from electric
current:
ū Do not use a damaged power
cable.
ū A damaged power cable may
only be replaced by the manu-
facturer or its customer service
or service partner.
ū Do not open any covers firmly
screwed onto the appliance
housing.
ū Only use the appliance when
it is in a technically flawless
condition.
ū A defective appliance may
only be repaired by an author-
ised workshop. Do not repair
the appliance yourself.
ū Do not make any changes to
the appliance, its components
or its accessories.
ū Do not immerse the appliance
in water.
ū Do not let the power cable
come into contact with water.
2.3 Risk of burns and scalds
Escaping fluids and steam may
be very hot. Parts of the appli-
ance can also become very hot.
To avoid scalds and burns:
ū Avoid escaping fluids and
steam coming into contact
with the skin.
ū Do not touch any nozzles on
the outlet during operation.
For your safety
33
14.09.2018 13:51:39