Changing Beverage Settings During Preparation; Stopping Beverage Preparation; Preparing Two Beverages Simultaneously; Permanently Changing Beverage Settings - Melitta CI Touch Mode D'emploi

Changing beverage settings during
preparation
The beverage quantity and the coffee
strength can be changed during beverage
preparation.
Requirement: The appliance is ready for
operation.
During beverage dispensing (coffee
or milk), use the "rotary switch" to
set the respective beverage quantity.
During the grinding process, use the
"Coffee strength" button to set the
coffee strength.
5.7 Stopping beverage
preparation
To stop beverage preparation prematurely,
press the selected direct key again.
5.8 Preparing two beverages
simultaneously
The "2 cups" button is used to pre-
pare two beverages.
Information
Two-cup dispensing is not possible for
beverages mixed with hot water (amer-
icano), for milk froth, warm milk or hot
water.
Fig. 11: Two-cup dispensing
Mel_009_CI_Touch_20_de--kr_druck.indb 41

Permanently changing beverage settings

1. Place two vessels beneath the out-
let (8).
2. Press the "2 cups" button (26).
3. Continue as described for the relevant
beverage preparation.
Information
ū This setting only applies to the next
beverage preparation.
ū If a beverage is not prepared within
1 minute, the appliance switches to
single-cup dispensing.
6
The appliance offers further options for
preparing coffee specialities.

6.1 Changing default settings

Depending on the beverage, the following
default settings can be changed:
Coffee amount, amount of froth, milk
amount, hot water amount, coffee
strength and temperature.
Changing the beverage settings is similar
for all beverages. Changing the coffee
strength for an Espresso is described here
as an example.
1. Press the "rotary switch" for 2 seconds.
»
2. Navigate to the
Direct keys > Espresso > Coffee strength
26
menu.
3. Select the desired coffee strength and
8
confirm your selection.
4. Select the Exit command to exit the
menu.
» The selected coffee strength is used the
next time an espresso is prepared.
Information
The default settings remain valid until they
are changed again.
Permanently changing
beverage settings
The menu appears on the display.
41
14.09.2018 13:51:39