10. TROUBLESHOOTING
When the engine will not start:
1. Is there enough fuel?
2. Is the fuel valve ON?
3. Is gasoline reaching the carburetor?
To check, move the fuel valve lever to the ON position and loosen the
carburetor drain bolt by turning 1 to 2 turns counterclockwise.
If any fuel is spilled, make sure the area is dry before starting the engine.
Spilled fuel or fuel vapor may ignite.
DRAIN BOLT
4. Is the ignition switch ON?
5. Is there enough oil in the engine?
6. Is the spark plug in good condition?
Remove and inspect the spark plug. Clean, readjust gap and dry the spark
plug. Replace it if necessary.
7. If the engine still does not start, take the pump to your servicing dealer.
30
WASHER
FUEL VALVE LEVER
ON