Changing Oil - Honda WB20XT Guide De L'utilisateur

1. Changing oil

Drain the oil while the engine is still warm to assure rapid and complete
draining.
1. Place a suitable container below the engine to catch the used oil, and then
remove the oil filler cap, drain plug and sealing washer.
2. Allow the used oil to drain completely into an approved container, then reinstall the
drain plug with a new sealing washer, and tighten it securely.
TORQUE: 18 N∙m (1.8 kgf∙m, 13 lbf∙ft)
3. With the engine in a level position fill with the recommended oil (see page
10) to the upper limit.
OIL CAPACITY: WB20XT: 0.56 L (0.59 US qt, 0.49 lmp qt)
WB30XT: 0.58 L (0.61 US qt, 0.51 lmp qt)
SEALING WASHER
(Replace)
DRAIN PLUG
OIL FILLER CAP
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with the
environment. We suggest you take it in a sealed container to your local service
station for reclamation. Do not throw it in the trash or pour it on the ground.
22
OIL LEVEL