Metal Processing; Emission Levels; Intended Use; Technical Data - Festool CARVEX PSC 420 EB Notice D'utilisation D'origine

PSC 420 EB, PSBC 420 EB
GB
erates dust, and protective gloves when working
with raw materials and when changing tools.
– Always secure the workpiece in such a manner
that it cannot move while being sawed.
– Harmful/poisonous dust may arise when work-
ing (e.g. paint products containing lead and
some types of wood). Contact with or inhalation
of this dust may pose a risk for the operating per-
sonnel or persons in the vicinity. Observe the
safety regulations applicable in your country.
Wear a P2 respiratory mask to protect
your health.
–Always connect the machine to a dust
extractor when work involves dust generation.
– Stroboscopic light can cause epileptic seizures.
Do not use this machine if you are susceptible to
epileptic seizures.
– Do not look into the stroboscope light. Looking
into the light source can damage your vision.
2.3

Metal processing

When processing metal, the following mea-
sures must be taken for safety reasons:
– Connect the machine to a suitable dust extractor.
– Regularly remove dust deposits in the motor
housing.
– Use a saw blade specifically designed for the cut-
ting of metal.
– Close the chip guard.
Wear protective goggles.
2.4

Emission levels

Levels determined in accordance with EN 60745 are
typically:
Sound pressure level
Noise level
Measuring uncertainty allow-
ance
4

Technical data

Cordless jigsaws
Motor voltage
Stroke speed
Stroke length
Pendulum stroke
16
Operating noise
Damage to hearing

Use ear protection!
Vibration emission value a
directions) and uncertainty K measured in accor-
dance with EN 60745:
Sawing wood
Handle
Gear head
Sawing metal
Handle
Gear head
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3
L = 88 dB(A)
Jigsaws are designed for sawing wood and materi-
PA
als similar to wood. With the special saw blades of-
L = 99 dB(A)
WA
fered by Festool, these machines can also be used
K = 3 dB
for sawing plastic, steel, aluminium, non-ferrous
metal and ceramic plates.
PSC 420 EB
1500 - 3800 min
CAUTION
h
PSC 420 EB
a = 6,0 m/s
h
K = 2,0 m/s
a = 11,0 m/s
h
K = 2,0 m/s
a = 7,0 m/s
h
K = 2,0 m/s
a = 12,0 m/s
h
K = 2,0 m/s

Intended use

The user is liable for improper or non-in-
tended use.
PSBC 420 EB
10,8 - 18 V
-1
1000 - 3800 min
26 mm
4 steps
(vector sum for three
PSBC 420 EB
2 2
a = 10,0 m/s
h
2 2
K = 2,0 m/s
2
2
2 2
a = 11,0 m/s
h
2 2
K = 2,0 m/s
2
2
-1