Visor - shark SKWAL Manuel D'utilisation

VISOR

A
QRVS System
Dismantling.
Raise visor in the upper position (A).
Exerting a traction on the side of the
visor (B).
Repeat the operation on the other side.
This visor has a system of easy disassembly
without tools, allowing you to clean it easily.
Assembly.
Place the visor face to the helmet.
Place the visor hooks in the side flanges (C).
Exerting a homogeneous pression on both
sides (D).
WARNING! If you are not sure that you properly
replaced the visor, do not use the helmet. The visor
could suddenly and without warning become detached
from the helmet while riding, causing you to lose control
of your motorcycle, resulting in an accident, personal
injury, or death.
8
B
Contact your retailer for any assistance or advice. Do not
ride with an open visor and do not try to open or adjust the
visor while riding. The visor could suddenly and without
warning become detached from the helmet, leaving your
eyes and face unprotected. In addition, your head could
be pulled to the side, causing you to lose control of your
motorcycle. These events could cause you to lose control
of your motorcycle, resulting in an accident, personal
injury or death.
WARNING! Tinted or dark visors should never be
used at night or under poor visibility conditions
as they reduce your ability to see. Never ride with
a fogged visor.
WARNING! If your visor no longer provides you
with clear visibility after a period of service, you
must immediately replace it. Never ride if your visor is
scratched, dirty, foggy or with your vision obscured in any
way. Always ride with perfect visibility.