shark SKWAL Manuel D'utilisation page 12

TEXTILE PARTS - REPLACE
REPLACE
- Start the operation by engaging the plastic part of
the front of the head section in its housing beginning
with one side (Fig. A).
Replace the rear part of the head section within its
housing (B).
- Position the textile part correctly.
- Reposition the cheek pads by passing the chin
straps through the slit in the foam (Fig. C).
- Replace the neck pad, inserting one of its side parts,
then position it correctly in its housing (D).
WARNING! If you have any doubt what-
soever regarding the removal or replace-
ment of the interior padding, DO NOT USE YOUR
HELMET. Contact your retailer for assistance or
advise. NEVER use your helmet with any part of
the interior padding removed. The helmet will not
protect you in an accident.
WARNING!
will compromise the fit of your helmet on
your head and could allow the helmet to come
off your head in an accident, resulting in a head
injury or death.
A
12
Damaged interior padding
B
C
D