shark Varial Manuel D'utilisation page 15

3. Grasp the back of the helmet at the
base and attempt to pull the helmet
off your head. Next, push the helmet
upwards from
guard. You should push and pull with
relatively significant force. If the helmet
starts to come off, the helmet is too big
for you; select a smaller size.
4. Bend your head forward as far as pos-
sible. The chin guard must not touch your
chest. See figure C.
5. Bend your head backwards as far as
possible. The helmet shell must not touch
your back. See figure
Never wrap your hair inside the
helmet, or place anything in or on your
hair inside the helmet. Never insert
padding to modify the position of the
helmet on the head.
If you have any questions about properly
sizing your helmet, see your retailer for
assistance.
C
beneath the chin
D.
A HELMET IN YOUR SIZE
Each of these tests must be repeated
throughout the life of the helmet, as the
comfort padding may wear or change
over time. If, during the life of your helmet,
your helmet does not maintain the correct
fit, you must replace the helmet.
WARNING! Never lend your helmet
to others without insuring a proper
fit in accordance with these instructions.
WARNING! If you cannot obtain
a proper fit in accordance with
these instructions, DO NOT USE THE
HELMET. Select a different helmet size or
model.
Sizing (cm)
XS 53/54
S 55/56
M 57/58
L 59/60
XL 61/62
XXL 63/64
D
5