Setting Up And Connecting The Refrigerator - Dometic 10 Série Instructions De Montage Et De Service

Setting up and connecting the refrigerator

7 Setting up and connecting the
refrigerator
A
NOTICE! Beware of damage
Only ever lay the refrigerator on its side, but never on its back.
Otherwise the refrigerator may be damaged.
7.1 Setting up the refrigerator
The device is designed for ambient temperatures between +16 °C and +43 °C. In
continuous operation, the air humidity may not exceed 90 %.
Set up the refrigerator in a dry, sheltered place. Avoid placing the refrigerator near
heat sources such as radiators, gas ovens or hot water pipes. Do not let the refriger-
ator stand in direct, strong sunlight.
7.2 Changing the door hinge (only single hinge version)
You can also change the hinge of the door, so that it opens to the left rather than the
right.
➤ To change the door hinge, proceed as follows (see fig. 3, page 4 to fig. 5,
page 5).
7.3 Changing the decorative plate
You can change the decorative plate on your cooling device to improve
the appearance.
➤ To change the decorative plate, proceed as follows:
– single hinge version: see fig. 6, page 6 and fig. 8, page 8
– double hinge version: see fig. 7, page 7 and fig. 9, page 9
7.4 Connecting the cooling device
For the electrical connection you also need the wiring diagram (standard connec-
tion: see fig. 0, page 10, customer-specific connection: see fig. a, page 10).
22
RC10.4 70, RC10.4 90
EN