Installing And Connecting The Refrigerator - Dometic WAECO CoolMatic CRX0050 Instructions De Montage Et De Service

Installing and connecting the refrigerator

7 Installing and connecting the
refrigerator
7.1 Safety instructions for installation on boats
Please note the following instructions for installation on boats:
D
DANGER!
If the appliance is powered by the mains, ensure that the power
supply has a residual current circuit breaker.
A
NOTICE!
 The appliance can be tilted sideways up to 30°. When setting
up the refrigerator, note that it must be secured to allow for
this. If you have any questions regarding installation, consult
your specialist dealer.
 Install the refrigerator so that the warm air generated can eas-
ily flow away (either upwards or to the sides, fig. 5, page 5).
 The appliance is designed for ambient temperatures between
+16 °C and +43 °C.
7.2 Installing the refrigerator
Observe the following when installing the refrigerator:
 Install the refrigerator so that the warm air produced can easily flow away
(either upwards or to the sides, fig. 5, page 5).
Key for fig. 5, page 5
No. Explanation
1 Cold intake air
2 Hot waste air
3 Condenser
4 Interval to maintain above the refrigerator if waste air cannot
circulate sufficiently upwards or to the side.
 Keep objects clear of openings in the housing or installation structure
(such as ventilation slots, etc.).
40
CRX0050, CRX0065, CRX0080
EN