Additional Safety Instructions For Glue Guns - Parkside PNKP 105 A1 Traduction Des Instructions D'origine

Additional safety instructions for glue guns

■ Children should be supervised to ensure that they do not play
with the appliance.
■ ATTENTION! This appliance must be placed on its stand
when not in use.
■ Always protect the appliance from rain and moisture. Water
entering a power tool will increase the risk of electric shock.
■ Do not misuse the power cord, e.g. to carry or hang up the appli-
ance, or to pull the plug from the socket. Keep cord away from
heat, oil, sharp edges or moving parts.
If the power cord is damaged or severed during work, do not touch
the cord but rather pull out the plug. Damaged or entangled
cords increase the risk of electric shock.
■ Only for indoor use.
■ If you take a break of longer than 30 minutes, pull out the power
plug.
■ Allow the appliance to cool completely after use and before
storage.
■ Do not work on any material containing asbestos.
■ Avoid the risk of injury or fire as well as health risks: RISK OF
BURNS! The adhesive and the nozzle reach a temperature of
around 105°C. Do not touch the nozzle or the glue. Do not
allow hot glue to come into contact with people or animals. In
case of contact with skin, rinse the affected part in cold running
water for a few minutes. Do not attempt to remove the adhesive
from the skin.
■ Always route the power cable towards the rear, away from the
appliance.
PNKP 105 A1
GB 41 ■
│