Maintenance; Safety Recommendations - EMAK 91 Manuel D'utilisation

6. MAINTENANCE

6.1 SAFETY RECOMMENDATIONS

WARNING!
doing maintenance work, take out
the ignition key and read the
relevant instructions. Wear adequate
clothing and work gloves whenever
your hands are at risk.
WARNING!
machine with worn or damaged
parts. Faulty or worn-out parts must
always be replaced and not
repaired. Only use original spare
parts: The use or non-original and/or
incorrectly fitted parts will
compromise the safety of the
machine, may cause accidents or
personal injuries for which the
Ma nu facturer is under no
circumstance liable or responsible.
IMPORTANT
used oil, fuel or other pollutants in
unauthorised places!
Before cleaning or
Never use the
Never get rid of
WARNING!
Any adjustments or
maintenance operations not
described in this manual must be
carried out by your Dealer or a
specialized Service Centre.
Both have the necessary knowledge
and equipment to ensure that the
work is done correctly without
affecting the safety of the machine.
All and any operations performed
in unauthorised centres or by
unqualified persons will totally
invalidate the warranty and all
obligations and responsibilities of
the manufacturer.
You must go to a specialised
Service Centre or contact your
Dealer if the following are
malfunctioning:
– the brake;
– the engagement and stop of the
blades;
– the drive engagement in forward
and in reverse gears.6.2
EN 25