EMAK 91 Manuel D'utilisation page 102

PROBLEM
10. Unusual
vibrations while
working
11. Uncertain or
ineffective braking
12. Erratic forward
movement, poor
drive when going
uphill or if the
machine has a
tendency to rear up
13. With the
engine running,
the machine does
not move when
the drive pedal is
pressed
(for hydrostatic
drive models)
If problems continue after having carried out these operations, contact your dealer.
WARNING!
necessary equipment or the technical knowledge. The warranty is automatically
voided and the manufacturer is not held responsible if repairs are done badly.
EN 32
LIKELY CAUSE
– cutting deck is full of grass
– blades are unbalanced or loose
– bolts and screws are loose
– the brake is not adjusted correctly
– problems with the belt or the
engagement device
– move the disengagement lever to
position «B»
Do not take on complicated repair work if you don't have the
SOLUTION
– clean the cutting deck (
– contact Your Dealer
– check and tighten all the engine and
frame bolts
– contact Your Dealer
– contact Your Dealer
– move it to position «A» (
5.4.10)
4.33)