Replacement Parts - ESAB Plasmarc EPP-200 Manuel D'instruction

SECTION 7
7.1 General
7.2 Ordering
Note:
Always provide the serial number of the unit on which the parts will
be used. The serial number is stamped on the unit nameplate.
To ensure proper operation, it is recommended that only genuine ESAB
parts and products be used with this equipment. The use of non-ESAB
parts may void your warranty.
Replacement parts may be ordered from your ESAB Distributor.
Be sure to indicate any special shipping instructions when ordering

replacement parts.

Refer to the Communications Guide located on the back page of this
manual for a list of customer service phone numbers.
Bill of material items that have blank part numbers are provided for
customer information only. Hardware items should be available
through local sources.
35
REPLACEMENT PARTS