Set Up Protocol - ATT COMBI LIFT 4.50 S Manuel D'exploitation

Set up protocol

i After successful set up, complete this form fully, sign it, make a copy and send to the manufacturer
within a week.
Otto Nußbaum GmbH & Co.KG
Korker Straße 24
D-77694 Kehl-Bodersweier
The system with serial number ____________________________
at (company name) _____________________________________ in (town, city) _____________________________
checked for function and safety and put into operation
The set up was done by the operating company / specialist (score out the one that does not apply).
The operating company confirms proper system set up, has read and will comply with all information con-
tained in this operating manual and inspection book, and will keep this document accessible to trained
operators at all times.
The specialist confirms proper system set up, has read all information in this operating manual and inspec-
tion book, and has transferred the documents to the operating company.
After successful inspection of function and safety by a trained assembler, the lift is transferred without elec-
trical connection (e.g. plug) to on-site power supply.
An on-site electrical connection between the lift and the power supply is to be done by a qualified electri-
cian (see details in the electrical plan).
Only fill out if the system has a fixed anchor.
Anchor used *)
Minimum anchor depth *) complied with:
Tightening torque *) complied with:
_________________________
Date
_________________________
Date
Service partner:
*) see anchor manufacturer enclosed instructions
152
___________________________________________________________
Type/brand
__________ mm
__________ Nm
_____________________________________________
Name, operating company & company stamp
_____________________________________________
Name, specialist
_________________________________________________________________________
Stamp
OPI_COMBI LIFT 4.50/4.65 S PLUS AMS - HYMAX II 4500/4650 S PLUS AMS_V1.1_DE-EN-FR-ES-IT
was set up on (date) ______________________
_________________________
Operating company signature
_________________________
Signature of specialist