Option1 Settings Menu; Setting The On-Screen Menu; Setting The Bnc Input Connector Type; Checking The Signal Being Transmitted To Rgb1 Terminal - NEC PlasmaSync 42XM5 Manuel D'utilisation

Option1 Settings Menu

Setting the on-screen menu

This sets the position of the menu, the display format
(horizontal or vertical) etc.
Example: Turning the DISPLAY OSM off
On "OPTION1" menu, select "OSM", then press the MENU/
ENTER button.
The "OSM" menu appears.
On "DISPLAY OSM" of "OSM" menu, select "OFF".
DISPLAY OSM
OSM ADJ.
OSM ANGLE
OSM ORBITER
OSM CONTRAST
SEL. ADJ.
Information
DISPLAY OSM settings
ON: The informations on screen size, volume control,
etc. will be shown.
OFF: The informations on screen size, volume control,
etc. will not be shown.
The DISPLAY button on the remote control will not
function either.
OSM ADJUST settings
Adjusts the position of the menu when it appears on the screen.
The position can be set between 1 to 6.
OSM ANGLE settings
Sets the display format (landscape "H" or portrait "V").
When the unit is installed vertically set the OSM
ANGLE at "V".
"H"
OPTION 1 1 / 4
OSM
BNC INPUT : RGB
D-SUB INPUT : RGB
RGB SELECT : AUTO
HD SELECT : 1080B
INPUT SKIP : OFF
ALL RESET : OFF
NEXT PAGE
SEL. RETURN
MENU/ENTER OK EXIT
* The menu language for "V" is English only.
* Some menu items including LONG LIFE mode will
not be displayed with "V", but can be performed by
setting with "H" (See pages 19 and 20 for the menu
items that can be displayed with "V").
OSM ORBITER settings
ON: The position of the menu will be shifted by eight
dots each time OSM is displayed.
OFF: OSM will be displayed at the same position.
OSM CONTRAST settings
NORMAL: OSM brightness is set to normal.
LOW: OSM brightness is set to lower.
OSM
: OFF
: 1
: H
: OFF
: LOW
RETURN
EXIT
"V"
OPTION1
OSM
BNC INPUT
: RGB
D-SUB INPUT
: RGB
RGB SELECT
: AUTO
HD SELECT
: 1080B
INPUT SKIP
: OFF
ALL RESET
: OFF
1024 768
SEL. MENU/ENTER OK
EXIT RETURN

Setting the BNC input connector type

Select whether to set the input of the 5 BNC connectors to
RGB or Component.
Example: Set the "BNC INPUT" mode to "COMP."
On "BNC INPUT" of "OPTION1" menu, select "COMP.".
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
:
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
Information
BNC INPUT Settings
RGB: Use the 5BNC terminals for RGB input.
COMP.: Use the 3BNC terminals for component input.
Checking the signal being transmitted to
RGB1 terminal
Use this to confirm the signal being transmitted to the
RGB1 terminal.
It is set to RGB and can not be adjusted.
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
:
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
CAN NOT ADJUST
Setting a computer image to the correct RGB
select screen
With the computer image, select the RGB Select mode
for a moving image such as (video) mode, wide mode or
digital broadcast.
Example: Setting the "RGB SELECT" mode to
"852 480 "
On "RGB SELECT" of "OPTION1" menu, select
"852 480".
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
:
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
Information
RGB SELECT modes
AUTO: Select the suitable mode for the specifications
of input signals as listed in the table "Computer input
signals supported by this system" on page En-42.
The others: The available resolutions are shown.
See page En-42 for the details of the above settings.
En-24
OPTION 1 1 / 4
: COMP.
: RGB
AUTO
: 1080B
: OFF
: OFF
ADJ. EXIT RETURN
OPTION 1 1 / 4
: RGB
: RGB
AUTO
: 1080B
: OFF
: OFF
OPTION 1 1 / 4
: RGB
: RGB
852 480
: 1080B
: OFF
: OFF
ADJ. EXIT RETURN