Specifications - NEC PlasmaSync 42XM5 Manuel D'utilisation

Specifications

42XM5
Screen Size 36.3 inches(H) 20.3 inches(V)
921.6 mm(H) 515.3 mm(V)
diagonal 42 inches
Aspect Ratio
16 : 9
Resolution 1024 pixels(H) 768 pixels(V)
Pixel Pitch
0.036 inches(H) 0.027 inches(V)
0.9 mm(H) 0.671 mm(V)
Signals
Synchronization Range
Horizontal : 15.5 kHz to 110.0 kHz
(automatic : step scan)
Vertical : 50.0 Hz to 120.0 Hz
(automatic : step scan)
Input Signals
RGB, NTSC (3.58/4.43), PAL (B,G,M,N),
PAL60, SECAM, HD*
Input Terminals
(VIDEO1 and RGB1 can also be used as OUTPUT terminals)
RGB
Visual 1 (Analog)
mini D-sub 15-pin 1
Visual 2 (Analog) BNC (R, G, B, HD, DV) 1*
Visual 3 (Digital)
DVI-D 24-pin 1*
Video
Visual 1 BNC 1
Visual 2 RCA-pin 1
Visual 3
S-Video: DIN 4-pin 1
DVD/HD
Visual 1 RCA-pin (Y, Cb/Pb, Cr/Pr) 1*
Visual 2
BNC (Y, Cb/Pb, Cr/Pr) 1*
Visual 3
DVI-D 24-pin 1*
Audio Stereo RCA 3(Selectable)
External Control
D-sub 9-pin 1(RS-232C)
Remote In
Mini jack 1
Remote Out
Mini jack 1
Sound output 8 W+8 W at 6 ohm
Power Supply
AC100 V to 240 V 50 Hz/60 Hz
Current Rating
4.5 A (maximum)
Power Consumption 285 W (typical)
Dimensions
40.2 inches(W) 24 inches(H) 3.9 inches(D)
1022 mm(W) 610 mm(H) 98 mm(D)
Weight 66.1 lbs / 30 kg (without stand)
Environmental Considerations
Operating Temperature 0 °C to 40 °C / 32 °F to 104 °F
Humidity 20 % to 80 % (no condensation)
Storage Temperature -10 °C to 50 °C / 14 °F to 122 °F
Humidity
10 % to 90 % (no condensation)
Other Features
Motion compensated 3D Scan Converter (NTSC,
PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3
pull down Converter (NTSC, 480I, 525I, 1035I,
1080I (60 Hz)), 2-2 pull down Converter (PAL,
576I, 625I, NTSC, 480I, 525I), Digital Zooming
(100 % to 900 % Selectable), Video Wall 4-25
multi screens, Self Diagnosis via RS232C,
Long Life Mode (PEAK BRIGHT, ORBITER,
INVERSE, WHITE, SCREEN WIPER, SOFT
FOCUS, etc.), Control Lock (Except power SW),
Input Skip, Color Tune, Programmable Timer,
Loop Throughout Interface, Plug and play
(DDC1, DDC2b, RGB3: DDC2b only), Enhanced
Split Screen, Protocol Set, etc.
Accessories
Power cord ( 1), Remote control ( 1), AAA
batteries ( 2), Manuals (Start up Guide and
CD-ROM), Ferrite cores for power cord ( 2),
bands for power code ( 2), Cable clampers
( 3), beads bands ( 3), Ferrite core for
remote cable ( 2).
Regulations
UL 60950-1, CAN/CSA-C22.2 No.60950-1-03,
FCC class B, ICES-003 class B
1 1 1
, DVD* , DTV*
The features and specifications may be subject to change without
notice.
2
* 1 HD/DVD/DTV input signals supported on this system.
3
480P (60 Hz)
525I (60 Hz)
625P (50 Hz)
720P (50 Hz)
1080I (60 Hz)
2
* The 5-BNC connectors are used as RGB2 and DVD/HD2 input.
1
Select one of them under "BNC INPUT".
1, 2
*
3
* Compatible with HDCP.
3
Supported Signals
• 640 480P @ 59.94/60 Hz
• 720 480P @ 59.94/60 Hz
• 720 576P @ 50 Hz
• 1280 720P @ 59.94/60 Hz
• 1280 720P @ 50 Hz
• 1920 1080P @ 59.94/60 Hz
• 1920 1080P @ 50 Hz
Note: In some cases a signal on the plasma monitor may not be displayed
properly. The problem may be an inconsistency with standards from
the source equipment (DVD, Set-top box, etc.). If you do experience
such a problem please contact NEC Corporation of America and also
the manufacturer of the source equipment.
En-46
1.59"
(40.4)
40.2" (1022)
36.3" (921.6)
Units are in inch
480I (60 Hz) 525P (60 Hz)
576P (50 Hz) 576I (50 Hz)
625I (50 Hz) 720P (60 Hz)
1035I (60 Hz) 1080I (50 Hz)
1080P (50 Hz) 1080P (60 Hz)
• 1440 (720) 480I @ 59.94/60 Hz
• 1440 (720) 576I @ 50 Hz
• 1920 1080I @ 59.94/60 Hz
• 1920 1080I @ 50 Hz
2.31"
(57.6)
3.9"
(98)
(mm)