Menu Tools - NEC MultiSync LCD1570NX Mode D'emploi

Controls
–continued
NATIVE: Original color presented by the LCD panel that is unadjustable.
sRGB: sRGB mode dramatically improves the color fidelity in the desktop environment by a
single standard RGB color space. With this color supported environment, the operator could
easily and confidently communicate color without further color management overhead in the
most common situations.
Tools
OFF TIMER: Monitor will automatically power-down when the end user has selected a
predetermined amount of time.
HOT KEY: You can adjust the brightness and contrast directly. When this function is set to
ON, you can adjust the brightness with left or right control and contrast with up or down
control while the OSM menu is off.
FACTORY PRESET: Selecting Factory Preset allows you to reset all OSM control settings back
to the factory settings. The RESET button will need to be held down for several seconds to take
effect. Individual settings can be reset by highlighting the control to be reset and pressing the
RESET button.

Menu Tools

LANGUAGE: OSM control menus are available in eight languages.
®
OSM LEFT/RIGHT: You can choose where you would like the OSM control
image to appear horizontally on your screen.
OSM DOWN/UP: You can choose where you would like the OSM control image to appear
vertically on your screen.
OSM TURN OFF: The OSM control menu will stay on as long as it is in use. In the OSM Turn
Off submenu, you can select how long the monitor waits after the last touch of a button to
shut off the OSM control menu.
OSM LOCK OUT: This control completely locks out access to all OSM control functions
without Brightness and Contrast. When attempting to activate OSM controls while in the
Lock Out mode, a screen will appear indicating the OSM controls are locked out. To
activate the OSM Lock Out function, press SELECT, then right control button and hold down
simultaneously. To deactivate the OSM Lock Out, press SELECT, then left control button and
hold down simultaneously while in the OSM menu.
RESOLUTION NOTIFIER: This optimal resolution is 1024 x 768. If ON is selected, a message
will appear on the screen after 30 seconds, notifying you that the resolution is not at 1024 x
768.
Information
e
Th Information menu indicates the current input, display resolution, horizontal and vertical
frequency, and polarity settings of the monitor. The model and serial numbers of your monitor
are also indicated.
OSM Warning
OSM Warning menus disappear with Exit button.
NO SIGNAL: This function gives a warning when there is no Horizontal or Vertical Sync.
After power is turned on or when there is a change of input signal, the No Signal window
will appear.
RESOLUTION NOTIFIER: his function gives a warning if a resolution other than the optimal
resolution is used. After power is turned on or when there is a change of input signal or the
video signal doesn't have proper resolution, the Resolution Notifier window will open. This
function can be disabled in the Menu Tools.
OUT OF RANGE: When input signal uses a resolution that is not supported or the horizontal
or vertical frequency is outside of the monitor's specification, the Out of Range message will
appear.
10
LCD1570NXmanual051105.pmd 10 5/11/05, 1:06 PM