Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Setting high definition images to the suitable
screen size
Use this procedure to set whether the number of vertical
lines of the input high definition image is 1035 or 1080.
Example: Setting the "HD SELECT" mode to "1035I"
On "HD SELECT" of "OPTION1" menu, select "1035I".
OPTION 1
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
:
AUTO
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
ADJ.
Information
HD SELECT modes
These 3 modes are not displayed in correct image
automatically.
1080B: Standard digital broadcasts
1035I: Japanese "High Vision" signal format
1080A: Special Digital broadcasts (for example :
DTC100)
Setting the Input Skip
When this is ON, signals which are not present will be
skipped over and only pictures whose signals are being
transmitted will be displayed.
This setting is valid only for the INPUT SELECT button
on the unit.
Example: Set to "ON"
On "INPUT SKIP" of "OPTION1" menu, select "ON".
OPTION 1
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
:
AUTO
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
ADJ.
Information
INPUT SKIP settings
OFF: Regardless of the presence of the signal, scan
and display all signals.
ON: If no input signal is present, skip that signal.
* "SETTING NOW" will appear during the input search.
1 / 4
:
RGB
:
RGB
:
1035
I
:
OFF
:
OFF
EXIT
RETURN
1 / 4
:
RGB
:
RGB
1080B
:
:
ON
:
OFF
EXIT
RETURN
En-25
Resetting to the default values
Use these operations to restore all the settings (PICTURE,
AUDIO, IMAGE ADJUST, OPTION1~4, etc.) to the
factory default values.
Refer to page En-19 for items to be reset.
On "ALL RESET" of "OPTION1" menu, select "ON", then
press the MENU/ENTER button.
OPTION 1
1 / 4
OSM
BNC INPUT
:
RGB
D-SUB INPUT
:
RGB
RGB SELECT
:
AUTO
HD SELECT
:
1080B
INPUT SKIP
:
OFF
ALL RESET
:
ON
NEXT PAGE
SEL.
MENU/ENTER
OK
EXIT
RETURN
When the "SETTING NOW" screen disappears, then all the
settings are restored to the default values.
ALL RESET
SETTING NOW
Publicité
Chapitres
Table des Matières
Dépannage
