Setting Closecaption; Setting The Contrast Of Closecaption; Option3 Settings Menu; Using The Timer - NEC PlasmaSync 42XM5 Manuel D'utilisation

Setting CloseCaption

Choose the closed caption mode that allows text to be
superimposed in the active video.
Example: Setting "CLOSECAPTION" to "CC2"
On "CLOSECAPTION" of "OPTION2" menu, select
"CC2".
OPTION 2
PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET
CLOSECAPTION
CAPTION CONT
NEXT PAGE
SEL. ADJ.
Information
CLOSECAPTION settings
OFF: This exits the closed caption mode.
CC1~4: Text is superimposed.
TEXT1~4: Text is displayed in full screen.
A closed caption signal may not be decoded in the
following signature;
1. when a video tape has been dubbed.
2. when the signal reception is weak.
3. when the signal reception is nonstandard.
When using closed captioned channel or the text mode,
the text screen always appears.
When there is no signal, however, the text screen will
not display text characters.

Setting the contrast of CloseCaption

Choose the brightness of the closed caption.
Example: Setting "CAPTION CONT" to "NORMAL"
On "CAPTION CONT" of "OPTION2" menu, select
"NORMAL".
OPTION 2
PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET
CLOSECAPTION
CAPTION CONT
NEXT PAGE
SEL. ADJ.
Information
CAPTION CONT settings
NORMAL: Closed Caption brightness is set to normal.
LOW: Closed Caption brightness is set to lower.
2 / 4
: OFF
: ON
: 3
: OFF
: ON
: OFF
: CC2
: LOW
EXIT RETURN
2 / 4
: OFF
: ON
: 3
: OFF
: ON
: OFF
: OFF
: NORMAL
EXIT RETURN

Option3 Settings Menu

Set "ADVANCED OSM" to "ON" in the MAIN MENU.

Using the timer

This function sets the day of the week and time. You can
also set the program timer which turns on or off the power
at the day of the week, time and the input mode you want,
or repeat timer which displays two input modes alternately.
On "OPTION3" menu, select "TIMER", then press the
MENU/ENTER button.
The "TIMER" screen appears.
PRESENT TIME
TIMER
SEL. MENU/ENTER
PRESENT TIME
This sets the day of the week and present time.
Example: Setting "WEDNESDAY", "22:05"
On "TIMER" menu, select "PRESENT TIME", then press
the MENU/ENTER button.
The "PRESENT TIME" screen appears.
Adjust the items.
RETURN
DAYLIGHT
SAVING TIME
SET
SEL.
Select "SET", then press the MENU/ENTER button.
The adjustments are stored and the TIMER menu reappears.
* If you press the EXIT button instead of the MENU/ENTER
button, the settings can not be made.
RETURN
DAYLIGHT
SAVING TIME
SET
SEL.
MENU/ENTER
Information
PRESENT TIME settings
DAYLIGHT SAVING TIME: Use to set DAYLIGHT
SAVING TIME.
ON: The present time + 1 hour.
OFF: Cancelled
Day: Set the day of the week (e.g. Sunday).
Hour: Set the hour in the 24-hour format (range 00 to
23).
Minutes: Set the minutes (range 00 to 59).
En-30
TIMER
: OFF
OK EXIT RETURN
PRESENT TIME
: OFF
WEDNESDAY
22 : 05 : 00
ADJ. EXIT RETURN
PRESENT TIME
: OFF
WEDNESDAY
22 : 05 : 00
RETURN
OK EXIT