Assembly; Removing The Oven Door - ETNA T7400 Notice D'utilisation

Removing and refitting the oven
door

Removing the oven door

- Open the oven door as far as it will go.
- Insert the locking pins enclosed into the drilled
holes of the door hinges.
- Grasp the oven door at both sides and lift it up
until it is nearly closed.
- Gently lift the door and pull the hinges forward
away from the door opening.
Important! Risk of injury!
Do not pull the locking pins out of the drilled
holes! The hinge is under tension. It must also be
under tension on installation. Once the pins
have been removed it is no longer possible to
tension and secure the hinge.
Refitting the oven door
- Grasp the oven door at both sides and slide
the hinges into the openings on the oven. The
hinge will click into place.
- Slowly open the oven door until it is fully open.
- Remove the locking pins from the drilled holes
of the door hinges again.
- Close the oven door.