Procedure For Tilting Up - Yamaha F4A Manuel D'utilisation

N
408**2
EMU01372

PROCEDURE FOR TILTING UP

1) Tighten the air vent screw(s).
When the separate fuel tank is used,
disconnect the fuel joint(s).
2) Place the fuel cock in the closed posi-
tion.
3) Place the gear shift lever in Neutral
and face the motor forward.
4) Tighten the steering friction adjusting
screw by turning it clockwise to pre-
vent the motor from turning freely.
5) Hold the rear handle and tilt the
engine up fully until the tilt support
bar automatically turns to the locked
position.
3-19
GB