Installation And Connections; Hardware Installation; Attachment (Wall Mount Version) - Gorgy Timing RADIO TIMING CP09 Mode D'emploi

2.1. HARDWARE INSTALLATION

2.1.1. Attachment (wall mount version)

► Use the wall support as drilling template.
► Attach the wall support fitted with hinges on the wall using 5 mm Ø screws (not
supplied).
135
☛
The bottom screw acts as an anti-theft device: tighten it firmly.
Position the RTCP09
hinges, align the hinge holes and the holes
on the RTCP09, and then insert the pins
into the hinges (A).
72
2.
☛
Required for the initial start-up of the product
150
Ø 5,2
3 x Ø 5
in front of the fixed

INSTALLATION AND CONNECTIONS

A
To block the rotation of the unit, insert a pin
into the horizontal hinge (B).
B
2
1
MDE-RTCP09-3060V2.2